Packaging for Gourmet Food & Craft Beverage Brands

Seasonal launches, gift presentation and sustainable materials — a category where the on-shelf date moves for nobody.

Mid-Autumn mooncake gift box with soft-touch lamination and spot UV

At a glance

Minimum order quantity
Cartons and labels from 1,000 units; gift boxes 500–1,000 units
Sampling
Presentation-quality sample in 5–7 working days. The sample cost is credited against your first approved production order.
Production lead time
Typically 15–20 working days after artwork approval; confirmed on your quote
Delivery terms
DDP or DAP to the EU and the UK, DDP to Switzerland and Japan; other countries, including the US and Australia: delivery terms set out on your quote. We do not publish duty or tax rates.
Production
Made to order (OEM/ODM)
Country of origin
Huai'an, Jiangsu, China
  • Festival Programmes
  • Gift Presentation
  • Paper-Based Materials
  • Divided Trays

Overview

Food and beverage packaging runs on a calendar. Mid-Autumn, Spring Festival, Christmas and harvest launches land on dates that do not move, so the real constraint is rarely the design — it is whether the specification can be sampled, approved, produced and shipped before a window that closes whether you are ready or not.

Mooncake and festival gift boxes are annual work for our gift box line, and the portfolio shows it. Those programmes need divided trays that hold portions in place, surfaces that survive months in storage before a short selling season, and enough production capacity in a compressed window.

Our paper packaging does not touch food directly. When a product needs a layer that touches the food, for example plastic, that layer can be made by our subsidiary, which holds ISO 22000 certification, and our paper packaging goes around it. Craft beverage brands additionally need labels specified for chilled and condensation exposure — the same discipline as our wine and spirits work, applied to smaller runs.

What we make for this sector

  • Festival & Gift Boxes — Mooncake, tea and confectionery gift boxes with divided trays.
  • Paper Tubes — Caddies and cylinder packs for tea, coffee and confectionery.
  • Tea & Food Paper Caddies — A paper caddy for tea, coffee and confectionery gifting, specified around how the product is packed rather than assuming one universal barrier.
  • Lid & Base Boxes — Divided trays for portions, produced annually against fixed festival dates.
  • Wooden Gift Boxes — Wooden boxes can be made for tea and food gift sets, sized to the products, with inserts to hold each item.
  • Window Cartons — A folding carton that lets the product take part in the front-panel design through a die-cut opening, optionally backed by a clear patch.
  • Beverage Labels — Bottle and can labels specified for chilled service and condensation.
  • Folding Cartons — Retail cartons with window options.
  • Multipacks & Shippers — Litho-laminated multipacks and printed transit cases.

What we produce for this sector

Festival & Mooncake Gift Boxes

Rigid boxes with divided trays holding portions in place, produced annually against fixed festival dates.

Tea & Confectionery Packs

Caddies, tubes and cartons for loose tea, coffee and confectionery, including gift and retail tiers.

Beverage Labels

Bottle and can labels specified for chilled service and condensation, on wet-strength or film face stocks.

Retail Cartons

Folding cartons with window options for products that sell on appearance as much as on brand.

Multipack & Shipper Cases

Litho-laminated multipacks and printed transit cases for distribution and e-commerce.

Carrier Bags

Paper and reusable non-woven bags for market stalls, farm shops and seasonal retail.

Selected work

What to get right in this sector

Food-contact layer

Our paper packaging goes around the food, not against it. Where the food needs a layer that touches it, for example plastic, that layer can come from our subsidiary.

The calendar is the constraint

Sampling 5–7 working days, production 15–30 working days, then freight. Work backwards from the on-shelf date, not forwards from today.

Storage before selling

Festival stock often sits for months before a short selling season. Lamination and board choice are specified for storage, not just for the shelf.

Portion fit

Divided trays have to hold portions still in transit and present them square on opening — decided on a loaded sample.

Paper-based options

FSC®-certified board on request (FSC® C232946; only products sold with an FSC claim on our invoice are FSC certified), recycled board, water-based inks and paper-based fitments in place of foam where the brief calls for it.

Specifications

Typical minimumsCartons and labels from 1,000 units; gift boxes 500–1,000 units
Food-contact layerPaper packaging does not touch food directly; a food-contact layer (for example plastic) can come from our ISO 22000-certified subsidiary

Terms for this specification

Sampling
Presentation-quality sample in 5–7 working days. The sample cost is credited against your first approved production order.
Colour matching
Pantone references and physical samples are used where the selected print process supports them. The approval method follows the substrate, artwork and process.
Certifications
ISO 9001, ISO 14001:2015, ISO 45001 and China Environmental Labelling (Ten-Ring).

What drives the cost

We do not publish a price list, because no two specifications are alike. The levers that decide a quote are consistent, though.

Quantity

Most of the cost of a print job is set-up — plates, dies, make-ready, the first good sheet. Doubling a run rarely doubles the price, which is why it is worth asking for two or three volumes on the same quote.

Structure

A rigid box is formed, wrapped and often assembled by hand; a folding carton is die-cut and glued in one pass. Structure is usually the single biggest difference between two otherwise identical packs.

Material

Board grade and wrap stock. Specialty and textured papers cost more per sheet, but can replace a finishing pass — sometimes the cheaper route to the same effect.

Finishing passes

Each of foil, emboss, spot UV and lamination is a separate pass through a machine. Two effects cost roughly twice one, so the question is always which effect earns its place.

Tooling

Dies, emboss plates and foil blocks are one-off costs carried by the first order and reused on every repeat. Repeat runs of an approved specification are materially cheaper than the first.

Design & artwork

We check print-ready files free. Ordering a sample? The dieline is included, drawn in-house to our presses. Design, or rebuilding AI images, is done by our partner studio and quoted per job.

See design services

Applications

Festival & Seasonal Gifting

Mooncake, Spring Festival and Christmas programmes with fixed dates and compressed production windows.

Tea & Coffee

Caddies, tubes and gift sets for loose leaf and speciality coffee.

Craft Beverage

Labels and multipacks for craft beer, cider and soft drinks, specified for chilled service.

Confectionery & Gourmet Retail

Window cartons, rigid sets and printed components for products bought as gifts.

Why Yuan Packaging

  • Paper packaging made to go around the food; a food-contact layer (for example plastic) can come from our subsidiary
  • Mooncake and festival gift programmes produced annually, on fixed and unforgiving dates
  • Gift box, label, carton and shipper made on one site so a seasonal launch has one schedule
  • FSC®-certified and recycled board with water-based inks for single-material paper specifications

Frequently asked questions

When should a festival programme start?

Work backwards from the on-shelf date. Sampling takes 5–7 working days and often iterates, complex gift boxes need 25–30 working days in production, then add freight. Festival work also competes for capacity industry-wide, so confirming early buys options rather than just time.

Can your cartons be used for food?

Our paper cartons and gift boxes are made as the outer pack and do not touch the food directly. When a product needs a layer that touches the food, for example plastic, that layer can be made by our subsidiary, which holds ISO 22000 certification, and our paper packaging goes around it. Tell us the product and where it sells.

Can you make the tray that holds the portions?

Yes. Divided trays and paper-based fitments are cut to your product so portions, each in its own wrap or inner pack, stay still in transit and present square on opening. Send the product or a dimensional drawing and the tray is developed alongside the box at sampling stage.

From the Journal

Request a custom packaging quote

What to send for a quote

  • The product it is for, and the format you have in mind
  • Size as length × width × height, and whether those are inside or outside dimensions
  • Quantity, or two or three quantities if you want to compare unit prices
  • Material and finish preferences, or the look you are after
  • Artwork status: print-ready files, a design without a dieline, or only a logo, ideas or AI images
  • The date you need the goods by
  • The destination country

Missing some of these? Send what you have, and we will ask about the rest.